Single Handle Wall Mounted Bathroom Faucet Brushed Nickel 196.1800BN


This product is a 1/2” NPT connection valve and trim combo with a single handle for temperature and volume control. Single handle wall mount bathroom sink faucets are more practical and easier to use because both volume and temperature can be controlled via a single lever handle.

Handle Operation – The volume and temperature of the water are controlled by a single handle.

ADA COMPLIANCE: All single handle wall mount bathroom sink faucets from Isenberg Faucets are ADA Compliant.

CRITICAL DIMENSIONS: Critical dimensions for single handle wall mount bathroom sink include the minimum installation height above the counter and also spout reach. Reviewing this information will ensure that when it is used with the chosen sink, splash is minimized.

Limitations of Liability This warranty is applicable only to Isenberg products purchased after 1st January, 2011 and shall be effective from the date of purchase as shown on the purchaser’s receipt. It applies only to Isenberg products purchased from Isenberg directly or from an Isenberg authorized dealer, and installed in the United States or Canada. This warranty is non-transferrable. The following exceptions shall apply to the Warranty Period for homeowners: (1) Standard Special finishes (i.e., any finish outside of Chrome and Brushed Nickel) shall be limited to a period of 3 years from the original date of purchase; (2) Living Finishes including polished brass and brushed brass finishes warranty shall be limited to a period of 1 year from the original date of purchase; (3) All chrome and brushed nickel finishes on cover plates and all handles shall be limited to a period of 3 years from the original date of purchase. In addition, the Warranty Period for drain assemblies, bathroom hoses, hand-helds, kitchen hand sprays and kitchen hoses shall be limited to a period of 1 year from the original date of purchase. This warranty is extensive in that it covers replacement of all defective parts and finishes, but these are the only two things that are covered. Damage due to installation error, product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether performed by a contractor, service company, or you, are excluded from this warranty. Further, this warranty will not apply if you do not use the product in its entirety. If any part (including but not limited to a cartridge, hose, handle, o-ring, aerator, flow limiting restrict-or, etc.), is not installed, removed, or replaced by a non-genuine Isenberg part, this warranty will be voided. Your sole and exclusive remedy, and Isenberg’s sole obligation, in case of a defective part or finish is to have Isenberg, at Isenberg’s sole option, repair or replace the defective part or finish. By way of example but not limitation, the following costs and expenses are not covered by this warranty: (i) labor costs for the removal, installation, re-installation, finishing or refinishing of the product, or defective part (or of building materials which must be removed, installed, reinstalled, finished or refinished in order to repair or replace the defective product or part); (ii) shipping and freight expenses required to return product to Isenberg. Repaired or replaced parts are individually warranted only under the same terms and for the remaining balance of the warranty period applicable to that part(s) which is/are repaired or replaced. IN NO EVENT, WILL ISENBERG BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES INCLUDING, BUT NOT LIMITED TO, LABOR, REMOVAL, RE-INSTALLATION, REFINISHING, LOSS OF USE OF THE PRODUCT, LOSS OF PROFITS, LOSS OF REVENUE, LOST GOODWILL, CLAIMS OF EMOTIONAL DISTRESS, OR CLAIMS OF WARRANTY HOLDERS’ CUSTOMERS, WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE) OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. EVEN IF THIS WARRANTY IS DEEMED TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL ISENBERG’S ENTIRE LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT WARRANTED HEREUNDER. THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES NOT EXPRESSLY SET FORTH HEREIN, WHETHER EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION PROVIDED BY THAT LAW. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Compliance with Local Codes Isenberg makes no representations that its products or its installation instructions comply with any or all local building or plumbing codes. It is your responsibility to determine local code compliance and correct usage. Isenberg strongly recommends using a licensed and insured plumber to install or service your Isenberg product. Warranty Claims Contact Information You may make a warranty claim or order replacement parts by calling Isenberg Bath’s Corporate office at +1-888-342-2284, or by writing to Isenberg Bath Corporation, P O BOX 630283, Irving TX 75063. Proof of purchase (original sales receipt) must accompany all warranty claims. To receive assistance or service under this warranty, you will be asked to provide a description of the problem, the model number of the product, your contact information, and the date of purchase. Isenberg may, at its option, also request that you, at your expense, mail the defective part or product to Isenberg for inspection.
Key Specs
Series 196
Item Category:
Sink Faucet
Flow Rate @ 60 PSI:
Contemporary / Modern
ADA Compliant:
WaterSense Compliant:
Installation Type:
Wall Mounted
Solid Brass Construction
Includes Rough In Valve
Number Of Handles:
Handle Type:
Cartridge Info:
Kerox K-35A
Limited Lifetime Warranty, See Warranty page for complete details
7.05 LBS
(No reviews yet) Write a Review
Square Feet Needed:


no waste 5% waste 10% waste
It is recommended you order 5% or 10% waste, depending on the size and layout of your project. Check one of the 'INCLUDE WASTE' options on the product page to automatically add 5% or 10% waste to your order. You may require more or less waste for your specific project.
  • 0 SQFT   (     )
  • $645.00   per SQFT
  • ( $645.00   per Box)
  • Waste : 0 SQFT
  • Total: $00.00